Omron CJ - PROGRAMMING MANUAL 12-2009 - Page 52

12
Operating Modes Section 1-4
Power turned ON.
PLC Setup set
for mode on
Programming
Console?
Programming
Console
connected?
CJ1, CS1-H, CJ1-H, or CJ1M
CPU Unit: CPU Unit starts in
RUN mode.
CS1 CPU Unit: CPU Unit
starts in PROGRAM mode.
The CPU Unit will start in
the mode set on the
Programming Console.
The CPU Unit will start in
the mode set in the PLC
Setup.
Ye s
No
No
Ye s