Section 6 Operation Interface
Communications Settings View
Refer to Communications Options in Section 2 Names and Functions of Components for information of RF Tag Communications
option.
p.33
Refer to Setting Communications Conditions in Section 2 Names and Functions of Components for information of RF Tag
Communications option.
p.40
The settings are immediately reflected when you click the "Set" button.
When the Reader/Writer is running in safe mode, this screen can not be operated. Run the Reader/Writer in RUN
mode.
Refer to RFID System Maintenance in Section 2 Names and Functions of Components f for communication diagnostic.
p.44
The error message is displayed if you change the configuration during the Reader/Writer is executing RF tag
communication or Noise measurement.
Item name Description Setting range Default
RF Tag Communications
option
Select the RF Tag communications
option.
Once, Repeat, or FIFO
Repeat
Once
RF Tag Communications
Speed
Specify the speed of communications
with the RF Tags.
High speed or Normal speed High speed
Write Verify Select this check box to enable write
verification.
Enabled/disabled Enabled
Use diagnostics Select to enabled or disabled. Enabled/disabled Enabled
Click this button to set
the displayed values.