What to do if Onicon Measuring Instruments show empty or partially filled pipe?
To ensure proper function of your Onicon Measuring Instruments, the pipe must be fluid-filled and acoustically transparent to obtain echoes.
What to do if Onicon Measuring Instruments show pipe not full?
To address a 'Pipe not full' error on your Onicon Measuring Instruments, verify the pipe is full by mounting the sensors at the top of the pipe and checking the echo icon. Note that no echo will be present if the pipe is not full.
General| Type | Electromagnetic Flow Meter |
|---|---|
| Enclosure Rating | NEMA 4X (IP66) |
| Probe Material | 316 Stainless Steel |
| Insertion Length | Adjustable |
| Outputs | 4-20 mA, Pulse, Modbus RTU |
Essential safety measures for product installation, operation, and service.
Lists key features, specifications, and technical data for the F-4300 transmitter and sensors.
Decodes the F-4300 model number to understand its configuration and options.
Criteria for choosing an optimal installation location for the meter enclosure and transducers.
Covers enclosure and transducer dimensions, and installation steps for 10, 20, and 30 Series.
Covers input power, wiring diagrams, and electrical safety precautions.
Guides through configuring units, setup, calibration, relays, logging, and communication.
Comprehensive table of Modbus register addresses, descriptions, and types for data access.
Detailed procedure for verifying installation and operational parameters before final use.
A checklist for recording essential installation and operational data during commissioning.
Solutions for common problems like erratic, low, or high meter readings.
Steps to resolve issues when the meter does not detect a signal from the transducers.
To Next Page
