OPTi CCA-TS2 User Manual

Operator’s Manual – OPTI CCA-TS2 8-1
8 DIAGNOSTICS AND TROUBLESHOOTING
8 DIAGNOSTICS AND TROUBLESHOOTING
Your OPTI™ CCA-TS2 Analyzer is designed to provide trouble-free service.
However, any measuring device may occasionally malfunction requiring you to identify the cause
of the problem and initiate corrective action.
This chapter describes OPTI CCA-TS2 specic system messages and recommends steps that
should return your analyzer to operation. System errors are stored in memory and an error report
can be printed (see Section 6.2.4).
If your OPTI CCA-TS2 does not perform correctly after conducting the basic steps outlined in
this chapter, you should contact OPTI Medical Systems for technical assistance.
8.1 System Error and Warning Messages
The OPTI CCA-TS2 displays the following types of
system status messages:
<SYSTEM WARNING MESSAGES>
• System warning messages notify the operator
of conditions requiring operator intervention to
complete the current measurement.
<SYSTEM ERROR MESSAGES>
• These errors occur during sample analysis
and are specic to the current sample being
analyzed. Error alarms indicate the status of
the current measurement or additional required
operator entry.
<SYSTEM STOP MESSAGES>
• These alarms indicate system conditions that
must be resolved before system operation can be
continued.
<NOT READY MESSAGES>
• These alarms indicate system conditions that
must be resolved before system operation can
resume.
<FATAL ERROR MESSAGES>
• These errors indicate conditions that halt system
operation and may require instrument repair.
Contact Technical Support for assistance.

OPTi CCA-TS2 Specifications

General

Brand	OPTi
Model	CCA-TS2
Category	Measuring Instruments
Language	English