OPTi CCA-TS2 User Manual

Operator’s Manual – OPTI CCA-TS2 7-11
7 MAINTENANCE
7.5.2 Changing the Printer Paper
The thermal printer paper supplied by OPTI Medical
contains an indicator strip to alert you when the
paper roll should be changed.
To change the roll:
1. Press the red printer release button on the printer
cover to acces the printer (Fig. 7-28).
2. Place the roll of printer paper into the paper tray.
3. Pull the end of the paper upward and slightly out
of the paper tray (Fig. 7-29).
4. Hold the paper and close the printer cover
(Fig. 7-30).
• The paper will automatically feed through
as the printer starts printing.
Fig. 7-28 Open Printer Cover
Fig. 7-29 Install Printer Paper
Fig. 7-30 Close Printer Cover
7.5.3 Performing Routine Cleaning
The OPTI CCA-TS2 Analyzer is designed to require
very little maintenance. Routine cleaning consists of
wiping the exterior analyzer surfaces including touch
screen with a soft, damp cloth.
NOTE: Neverusestrongorabrasivecleanersonthe
OPTICCA-TS2analyzer.
NOTE: Donotspraycleaningspraydirectlyonto
thescreen.

OPTi CCA-TS2 Specifications

General

Brand	OPTi
Model	CCA-TS2
Category	Measuring Instruments
Language	English