OPTi CCA-TS2 - Classifications; Calculated Parameters; Temperature; Units Used in Measured and Input Parameters for Calculations

Operator’s Manual – OPTI CCA-TS2 A-7
APPENDIX A - TECHNICAL SPECIFICATIONS
Classications
Approvals: UL 61010-1, IEC 61010-2, IEC 61010-2-101,
CAN/CSA C22.2 NO.61010-1, CE, FCC Class B
LED Classication: IEC 62471 Exempt Risk Group
Mode of Operation: Continuous Operation
Laser Classication: This device is a Class 1 laser device according to
IEC 60825-1
Explosion Protection: This device is not designed for operation in
explosive environments
Calculated Parameters
The calculated parameters in the OPTI CCA-TS2 are based on the CLSI Standard C12-A,
when available.
Temperature
4
[ ] [ ]
32
5
9
+°⋅
=° CTFT
[ ]
[ ]
( )
32
9
5
−°⋅=° FTCT
Units Used in Measured and Input Parameters for Calculations
pH..............pH-unit Cl............. .mmol/L
PCO
2
..........mmHg Glu.............mmol/L
PO
2
.............mmHg BUN ......... mg/dL
Na...............mmol/L Lac ............mmol/L
K ................mmol/L tHb ............g/dL
Ca............... mmol/L SO
2
..............%
4
Burtis AB, Ashwood ER, “Tietz Textbook of Clinical Chemistry” 2
nd
Ed. (Philadelphia, W.B. Saunders 1994),
p. 2165