Operator’s Manual – OPTI CCA-TS2 4-5
4 CALIBRATION AND QUALITY CONTROL
4. Select the desired levels (Fig. 4-4) and press
.
5. Open the sample chamber cover by pressing
down on the red latch (Fig. 4-5).
6. Examine the SRC to ensure it is clean and insert
it into the chamber. Press down to properly seat
the SRC (Fig. 4-6).
Fig. 4-4 Select Level
Fig. 4-5 Open Cover
Fig. 4-6 Insert SRC
To Next Page
Loading...