Opticon MDI-4100 - Figure 41: Code Coordinates

MDI-4000 Series Serial Interface Manual
90
Code Coordinate Commands
Command
Description
Default
[DDX
Code vertex coordinate
[DDY
Code center coordinate
Vertexes output format:
X
1
/Y
1
:X
2
/Y
2
:X
3
/Y
3
:X
4
/Y
4
Center output format:
X/Y
where:
• X: 1 to 3 digits
• Y: 1 to 3 digits
The range of the coordinates is:
• X: 0 to 639
• Y: 0 to 479
Figure 41: Code Coordinates
7.2.3.5 Scan Time
The scan time is the time from when the trigger is pressed until data output starts.
Scan Time Command
Command
Description
[EDG
Scan time
Coordinate (0,0)
Vertex1（X1,Y1）
Center （X,Y）
Vertex2（X2,Y2）
Vertex3（X3,Y3）
Vertex4（X4,Y4）
X Coordinate(639,0)
Y Coordinate(0,479)