Opticon MDI-4100 - 9 Indicator Options; Buzzer; Buzzer Volume

MDI-4000 Series Serial Interface Manual
98
2. Follow the instructions to configure batch reading settings for up to 4 barcodes. To
configure additional settings, contact your local Opticon Representative.
9 Indicator Options
You can configure options for the Buzzer and Good Read LED.
9.1 Buzzer
The scan engine provides feedback through these buzzer indicators:
• Good read
• Startup
• Read timeout
• Intermediate
The BUZZERn signal controls the buzzer tone and sound pressure with the pulse-width
modulation (PWM) signal.
9.1.1 Buzzer Volume
Buzzer volume settings are applied to all buzzers.
Buzzer Volume Commands
Command
Buzzer Loudness
Default
T0
Maximum
✓
T1
Loud
T2
Normal
T3
Minimum