Opticon MDI-4100 - Trigger Delay; 6 Barcode Options; How to Set Readable Barcodes; Barcodes

MDI-4000 Series Serial Interface Manual
51
5.6.4 Trigger Delay
Set the Trigger Delay to start reading after a specified period of time.
Trigger Delay Commands
Command
Description
Default
[DEC
Qa
Qb
Qc
Qd
Trigger delay time (1000a+100b+10c+d [s])
0 ms
Figure 36: Trigger Delay Timing
6 Barcode Options
Barcode options for the scan engine let you configure the enabled code types, code specific
options, and the number of characters to read. These settings do not affect reading 1D menu
barcodes.
Note: For best reading performance, only enable the barcodes you need.
6.1 How to Set Readable Barcodes
The next tables show the supported symbologies and their configuration commands. These
options are available for the Enable/Disable command:
• Single: Only the specified symbology is enabled. All other symbologies are disabled.
• Multiple: The specified symbology is enabled in addition to the symbologies that are
already enabled.
• Disable: The specified symbology is disabled. All symbologies that are already enabled
remain enabled.
TxD
or
USB-
TRIGn
RxD
or
USB+
Scan
Trigger delay
Trigger delay time
Data
“Z” Command
Imaging and Decoding