Example prefix/suffix setting:
To set “C39:” as the prefix and “CR” and “LF” as the suffix for Code 39, send this command:
<Esc>M40CQ3Q96AO41M1J<CR>
Note: You can also set the prefix/suffix with a menu or 2D menu barcode.
7.2.2 Prefix/Suffix Commands
The prefix/suffix commands clear the current values, including the default suffix “CR” and
configure new settings.
Prefix/Suffix Commands for all Barcodes
* By default, “CR” is added to the prefix or suffix for all barcodes. To clear “CR”, send the “RZ” command only.
Barcode Prefix and Suffix Commands
To Next Page
Loading...
