Orbit Reader 20 Plus – User guide Version 1.0
Orbit Research Confidential and Proprietary Information 19
Editor Encoding
The Editor Encoding setting applies to new files only and allows the user to save
the file in the desired encoding format. It has the following options:
a. UTF-8
b. Unicode-16LE
c. Unicode-16BE
d. ANSI
Pressing the Select key will select the profile. Pressing the Right Arrow key on
any of the profile will open its sub-menu options. The user can scroll through
these sub-menu items by pressing the Right/Left Arrow keys.
The hotkeys for switching between profiles are Select + 1, Select + 2, Select + 3,
and Select + 4 for profiles 1, 2, 3, and 4 respectively.
If the user accidentally selects an unfamiliar language, pressing Select + 1 2 3
will restore the default profile.
11.2 Menu Availability
The menu is available for the Remote and Stand-Alone modes. Press Select +
Up Arrow to open the menu in either mode.
To exit the menu and return to the previous mode, press Dot 7.
11.3 Menu Options
Some of the Menu options have a default setting (indicated in the list below). For
most of these options, you can move among alternatives by pressing the Right or
Left Arrows and then pressing Select or Dot 8. Selected items are underlined
with Dots 7 8. Refer to the specific section for further information.
To Next Page
Loading...
Need help?
General