Orbit Reader 20 Plus ā User guide Version 1.0
Orbit Research Confidential and Proprietary Information 28
13.1 File Manager Commands
The following are the commands which you can use in the File Manager. Most of
the commands for files also work for folders.
Pressing Select or Dot 8 opens the file or folder.
Go to
previous or
next file or
folder
Pressing Up or Down Arrow moves to the previous or
next file in the list.
Dot 7 acts like a "back" key to exit current activity. If you
are already in File Manager, pressing Dot 7 moves
back one level where you have multiple subfolders
open.
If you are at the root level, Dot 7 does nothing. If you
are in one of the columns of information, for example,
size or date, then pressing Dot 7 returns to filename.
Move through
file
information
This command moves you through the file information
by headings. See File Manager section for more
information.
Pressing Select + Up Arrow opens the Menu.
Left or
Right
Panning
keys
If the file name is longer than the display, panning left
or right displays more of the file name. When you get to
the end of the file name, pressing the panning key
moves you to the next item of file information, like
position, size, date, and so on.
The New File command starts the Editor mode with a
new file. To exit the Editor, press Select twice.
The New Folder command opens the Edit Box where
you may type the name of the new folder. Pressing Dot
8 saves the folder name and returns you to the file list
with the new folder selected. If you do not name the
folder, pressing Dot 8 names the folder as New Folder.
Press Select to exit without making a new folder.
This action deletes the currently selected file(s) or
folder(s). Only empty folders and unprotected files can
be deleted. A confirmation is required before the file or
folder is deleted. When the message "-- Confirm action"
is displayed, press Select or Dot 8 to confirm or press
Dot 7 to cancel.