Orbit Research Orbit Reader 20 Plus User Manual

Orbit Reader 20 Plus – User guide Version 1.0
Orbit Research Confidential and Proprietary Information 63
18.3 Calculator Commands
Functions
Keys
Open/Close Calculator
Space + C (Dots 1 4 7)
Addition
Select + Up arrow / (Dots 3 4 6)
Subtraction
Select + Down arrow / (Dots 3 6)
Multiplication
Select + Right arrow / (Dots 1 6)
Division
Select + Left arrow / (Dots 3 4)
Dot 8/Answer
Select key / (Dots 1 2 3 4 5 6)
Backspace
Dot 7
Clear Entry
Space + Dot 7
All clear
Space + Dot 7 + Dot 8
Decimal point
Dot 4 + Dot 6
Pi key: Displays the value of pi
Dot 1 + Dot 2 + Dot 3 + Dot 4
M+ (Memory Plus)
Space + Up arrow
M- (Memory minus)
Space + Down arrow
MR (Memory recall)
Space + Left arrow
MC (Memory clear)
Space + Right arrow
History navigation
Space + Panning key
18.4 Calculator Copy/paste Operations
This feature allows you to copy/paste expression within Calculator or to and from
a file
Copy/paste within Calculator
Set cursor on digit starting from which you wish to copy.Press select, it will show
the context menu.
Press down arrow keyto scroll down to “M mark” and press select, it will give
message -" Mark set"( indicates a mark by raising both Dots 7 and 8 on the
character where the mark occurs).
Press right arrow key to set cursor to the point up to which you need to copy.
Now press select to enable context menu. Press up/down arrow key scroll down
to “C copy” and press select. it gives message "-- Copied".
The content has been copied to clip board. Press to dot7 to cancel message.

Orbit Research Orbit Reader 20 Plus Specifications

General

Brand	Orbit Research
Model	Orbit Reader 20 Plus
Category	Monitor
Language	English