Introduction
−3−
1 Introduction
Before use
Only qualied and educated personnel should work with the product.
Use the product correctly after thoroughly reading the section "2 Safety precautions" on p.4.
The items under
contain important handling instructions that the user should observe to ensure safe use of the
product.
is described in the related handling items.
The product described in this manual has been designed and manufactured to be incorporated in general industrial
equipment. Do not use for any other purpose. Oriental Motor Co., Ltd. is not responsible for any damage caused
through failure to observe this warning.
Overview of the product
The DSC Series is a speed control motor and controller package equipped with closed loop control system which
achieves high reliability.
This product controls the motor rotation speed by constantly utilizing feedback from the tachogenerator built in the
AC motor so that the set rotation speed can be maintained even if a load is uctuated.
It is supplied as a package consisting of a speed controller displaying the motor rotation speed and a dedicated motor
pre-assembled with a high-performance gearhead.
The speed controller can be operated with selecting maximum 4 operation data, in addition to equipping convenient
functions such as speed display based on the application, various alarms to detect the motor malfunction and others.
To Next Page
Loading...
