Oriental motor DSC Series - Accessories; Connection and Signal Cables; Optional Accessories

Accessories (sold separately)
−41−
13 Accessories (sold separately)

Connection cables
These cables are used to extend the wiring distance between the speed controller and motor.
Flexible connection cables are also available.
The wiring distance can be extended to a maximum of 10.5 m (34.4 ft.).
Connection cables Flexible connection cables
Length [m (ft.)] Model Length [m (ft.)] Model
1 (3.3)
CC01SC
1 (3.3)
CC01SCR
2 (6.6)
CC02SC
2 (6.6)
CC02SCR
3 (9.8)
CC03SC
3 (9.8)
CC03SCR
5 (16.4)
CC05SC
5 (16.4)
CC05SCR
10 (32.8)
CC10SC
10 (32.8)
CC10SCR

General purpose cables for I/O signals
These cables are very convenient to connect I/O signals of the speed controller.
Cables up to 2 m (6.6 ft.) are provided.
Length [m (ft.)]
Model
16 core 12 core
1 (3.3)
CC16D010B-1 CC12D010B-1
2 (6.6)
CC16D020B-1 CC12D020B-1

External potentiometer
This potentiometer is used to set and adjust the motor rotation speed remotely.
Model:
PAVR-20KZ

Capacitor mounting bracket
This mounting bracket is used to install the capacitor to DIN rail.
Model:
PADP01C

Set of a lead wire with a crimp terminal for capacitor connection
This is a lead wire with a crimp terminal which can easily connect by tting to the capacitor terminal.
10 pieces of the lead wire of 500 mm are provided as a set.
Length [mm (in.)] Model
500 (20)
LCCN0510