Orthofab Tango - Changing Calf Pad Height; Changing Calf Pad Positions

To Next Page

To Previous Page

4 SETUP INSTRUCTIONS

4.1.4 CHANGING CALF PAD HEIGHT

NOTE: The calf pad is adjustable in height, depth and width (see; figure 3).

a) To adjust calf pad height:

1. Loosen screw (A) using a 5 mm Allen key;

2. Slide support (B) until you reach the needed position;

3. Put back screw (A) and tighten firmly.

NOTE

: The calf pad is not adjustable in height with the articulated legrest.

Figure 3 : Calf pad adjustment.

4.1.5 CHANGING CALF PAD POSITIONS

a) To adjust calf pad width (see; figure 3):

1. Loosen screws (C) using a 4 mm Allen key;

2. Slide calf pad (D) until you reach the needed position;

3. Tighten screws (C).

b) To adjust calf pad depth (see; figure 3):

1. Loosen screw (E) using a 5 mm Allen key;

2. Loosen screw (F);

3. Adjust at the needed position and tighten screws (E) and (F).