5 OPERATING INSTRUCTIONS
inc All rights reserved
83
5.9 SEAT BELT
It is important for your comfort and safety that the belt provided with the
wheelchair be adjusted to your size.
Never modify the assembly or anchor point of your belt..
In a paratransit transportation, the belt provided with your
wheelchair, cannot be used as a seat belt. It is a restraint
belt only.
To adjust the belt length, slip the strap in the plastic loop as represented in the next figure 54-A.
Figure 54-A : Seat belt length adjustment.
NOTE: The free part must always exceed at least three (3) inches from the plastic loop.
If you want to prevent the strap to slip from de plastic loop, pass the belt again in the plastic
loop as shown on the figure below 54-B.
Figure 54-B : How to prevent seat belt adjustment modification.
To Next Page
Loading...