5 OPERATING INSTRUCTIONS
inc All rights reserved
81
5.8 ANTI-TIPPERS
5.8.1 TO REMOVE
•
In order to facilitate the transportation of your wheelchair, the anti-tippers can
be removed. To do this, exert a pressure on the (A) spring release button
and remove the anti-tipper from its housing (see; figure 53-A).
5.8.2 TO SWINGAWAY
1. To go over some obstacles, the anti-tippers can be swingaway towards the inside
of the frame (see; figure 53-A) ;
2. In this case, a third person must protect against any movements from behind the
wheelchair, near the backrest, both hands in contact with the backrest push
handles.
Never use your wheelchair if the anti-tippers are not
installed.
Figure 53-A : Anti-tippers adjustment.