Otodynamics Otoport Flex - Page 100

CHAPTER ELEVEN
Saving the test
100
Saving the test
Select PC Load or Print (the option available will depend on your setup
(see 15.4.4) to send the test result to the Otoport printer or to the PC.
11.1.2 Quick Save On
If Quick Save is On, the options after test are Retest, Cancel and Finish.
Select Cancel to discard the test result. A prompt requiring conrmation will
be shown before the result is discarded.
Select Retest to save the result and run another test on the same patient.
This will navigate back to the ear selection screen to select the test ear for
the next test.
Select Finish to return to the main menu.
Unless Cancel is selected the test will be saved to the current patient
or will be given an automatic ID and name. This name and ID may be
edited by selecting Last from the main menu screen. If Automatic print is
selected (see chapter
15 Conguration), the print routine will be activated
at this stage. After printing or immediately after saving, the unit will return to
the Main Menu.