Otodynamics Otoport Flex - Mode Select

CHAPTER FOUR
Switching on
48
Switching on
4.3 Mode select
The Otoport DP+TE has two distinct operating modes: Screen and
Clinical.
The Screen mode is designed to run tests in the shortest possible time and
to stop automatically when there is conclusive evidence that a response is
present.
The Clinical mode is designed to run longer, more detailed tests that will
run until the user is satised with the quality of the data.
Select the mode which meets your requirements.
Both modes are fully congurable and either can be disabled (see chapter
15 Conguration).
To return to the Mode Select screen, enter and then exit the Cong area
(see chapter
14 Utilities) or turn the Otoport o󰀨 and on again.
This screen is not shown if one of the modes is disabled.