Otoport OAE+ABR
User Manual for Otoport DP+TE model
165
Quality checks
17.2 ABR cable test
The ABR cable test checks the continuity of the electrode cables.
Attach the probe snaps to the top of the cable tester as illustrated.
Select ABR Cable Test and wait for the result to be displayed. If the
electrode cables are OK then a large tick is displayed on the screen.
If any of the cables fail the test, a large cross is displayed.
Select Details to see the results for each cable. The impedances should
show zero for all cables.
If any cable shows a cross, check that it is properly connected to the
Otoport and retest. If it continues to fail then replace the cable.
To Next Page
Loading...
