Otodynamics Otoport Flex - Page 142

CHAPTER FIFTEEN
Conguration
142
Conguration
Print type
Print type controls the length and detail contained in the Otoport printout.
The Summary format prints only core patient and test details. The
Detailed format prints a fuller set of patient and test quality details (see
section
16.2.3).
On connect
On connect printing allows printing to be initiated as soon as a wired
printer is connected. This is particularly useful if the Otoport is used with a
Docking Station as it allows results to be printed as soon as the Otoport is
dropped into the docking station.
On connect may be turned O󰀨 or set to print the last Test, all unprinted
tests for the last Patient, or All unprinted tests.
Printing will only start if the Otoport is on and displaying one of the main
module screens.
If Cancel is selected during the print, three options are available:
If Cancel Print is selected, the Otoport will not attempt to automatically
print the test(s) again (test may still be selected to be printed manually).
If Retry is selected then printing will recommence.
If Stop On Connect is selected then the On connect setting is turned o󰀨
and the Otoport will not attempt to print tests on connection in future.
Worklist
The Worklist allows details for multiple patients to be entered into the
Otoport prior to testing. If Worklist is set to On, the list is accessible from
the main menu (see chapter 13). If the Worklist is set to O󰀨, it is not
available.
Language
Select the language you require using the left and right arrowkeys.