Otoport OAE+ABR
User Manual for Otoport DP+TE model
183
Power
Notes:
If forced it is possible to insert the charger connector into the
Otoport the wrong way up. In this position the Otoport will not
charge.
Disconnect the connector and re-insert with the arrow facing
upwards.
If the cables provided with your Otoport have a locking
connector, as shown below, squeeze the release keys at the
sides of the connector when removing the plug.
When the Otoport is connected the display will show the current battery
level. This screen is updated every minute to show how the charge is
progressing.
A full charge will take up to 4 ½ hours.
When the device is fully charged a large tick will appear on the screen.
To Next Page
Loading...
