Otodynamics Otoport Flex - Page 215

Otoport OAE+ABR
User Manual for Otoport DP+TE model
215
Technical specications
Notes:
1 At 80 MHz and 800 MHz, the higher frequency range applies.
2 These guidelines may not apply in all situations. Electromagnetic propagation is
a󰀨ected by absorption and reection from structures, objects and people.
(a) Field strengths from xed transmitters, such as base stations for radio (cellular/cordless) telephones
and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment due to xed RF transmitters, an
electromagnetic site survey should be considered. If the measured eld strength in the location in which
the Otoport OAE+ABR is used exceeds the applicable RF compliance level above, the Otoport OAE+ABR
should be observed to verify normal operation. If abnormal performance is observed, additional measures
may be necessary, such as re-orienting or relocating the Otoport OAE+ABR.
(b) Over the frequency range 150 kHz to 80 MHz, eld strengths should be less than 3 V/m.