Palm Tungsten T2 User Manual

Chapter 14 Using Phone Link
158
See “Network Preferences” in Chapter 22 for information on setting up multiple
network service profiles.
To make an infrared connection:
1. Turn on your handheld and your mobile phone.
2. Activate the infrared port on your phone.
3. Align the infrared port on your handheld with the infrared port on your phone.
4. Launch the application that requires the phone connection.
For example, to access the Internet, launch a web browser application.
To make a cable connection:
1. Connect the cable to your handheld and mobile phone.
2. Turn on your handheld and your mobile phone.
3. Launch the application that requires the phone connection.
For example, to access the Internet, launch a web browser application.
To make a Bluetooth connection:
1. Turn on your handheld and your mobile phone.
2. Activate Bluetooth on your handheld and phone.
3. Make sure your phone is within 10 meters (approximately 30 feet) of your
handheld.
4. Launch the application that requires the phone connection.
For example, to access the Internet, launch Palm™ Web Browser Pro.

Palm Tungsten T2 Specifications

General

Brand	Palm
Model	Tungsten T2
Category	PDA
Language	English