Palm Tungsten T2 User Manual

Customizing Web Browser Pro
341
3. Change one or more of the following settings:
4. Tap Done.
Changing the host server
Your handheld uses a host, or in other words, proxy server to access the Internet.
You can change your host server.
IMPORTANT You should not change this setting from its default, “webpro.palm.com”,
unless you are told to do so by your system administrator.
To access a new host server:
1. Tap the Menu icon .
2. Tap Options, and then tap Preferences.
3. Tap Advanced.
4. Tap the Host Address field.
5. Enter the Internet Protocol (IP) address or host name of the new server.
NOTE If you enter the IP address of the new server, make sure you enter the
address exactly, including periods.
6. Tap OK to save your changes.
7. Tap OK.
Always connect using
Check if you always want to use the same ISP to connect
to the Internet.
Service
Select the ISP you want to use to connect to the Internet.

Palm Tungsten T2 Specifications

General

Brand	Palm
Model	Tungsten T2
Category	PDA
Language	English