Palm Tungsten T2 User Manual

Chapter 22 Setting Preferences for Your Handheld
390
Turning Bluetooth communication on and off
By default, the Bluetooth communication feature on your handheld is turned off.
The default setting is designed to conserve battery power. When Bluetooth
communication is off, you cannot communicate with other Bluetooth devices. You
must turn on Bluetooth communication to use any of the Bluetooth
communication features. Keep in mind that when Bluetooth communication is on,
your battery will drain more quickly than when Bluetooth communication is off.
To turn on Bluetooth communication:
1. From the Communications Preferences list, select Bluetooth.
2. Tap the Bluetooth pick list and select On.
NOTE Switching Bluetooth On and Off may take several seconds. Please wait
before continuing to step 3 below.
3. Tap Done.
Assigning a Bluetooth device name
The Bluetooth device name is similar to wearing a name tag. The name you assign
to your handheld identifies you to other Bluetooth devices. When other users
search for Bluetooth devices, your Bluetooth device name appears on their screen
as a discovered device. If you do not enter a device name, your handheld sends the
default name Palm OS handheld.
To assign a Bluetooth name to your handheld:
1. From the Communications Preferences list, select Bluetooth.
2. Tap the Device Name box.
Bluetooth pick list

Palm Tungsten T2 Specifications

General

Brand	Palm
Model	Tungsten T2
Category	PDA
Language	English