Setting Communication Preferences
413
4. In the Send field, enter the INIT string provided by your wireless operator.
5. Tap OK.
High-speed wireless data network services are not available in all locations. If you
pass from an area with coverage into one without coverage, you will lose your
network connection with no notice.
If your network connection drops unexpectedly, check your phone to see if a
high-speed wireless data network is active and available for the area you are in. If
a high-speed wireless data network is available, reconnect to the network using the
preceding steps.
If a high-speed wireless data network is not available, you must switch your phone
to a standard (non-GPRS) phone connection and access the Internet using your ISP.
You can do this only if you have previously created a standard connection with
your phone. For instructions on creating a standard connection, see “Setting up a
phone connection” in Chapter 14.
Adding detailed information to a network service profile
If you are using one of the predefined network service profiles, you probably need
to enter only your user name, password, and telephone number. If you are creating
a new network service profile, you may need to provide additional information to
your ISP or dial-in server. You use the Details dialog box to add more information
to a selected network service profile.
To add connection details:
1. From the Communications Preferences list, select Network.
2. Tap the service field.
Enter INIT string here
To Next Page
Loading...
Need help?
General
