C14 C30 C60 C14 C30 C60
No. of interrupt programs
Input 14 programs, periodical interrupt 1
Input 8 programs, periodical interrupt 1
Sampling trace
Available Sampling by commands/Sampling at regular time intervals
For one sampling: 16 bits + 3 words
C14=300 samples
C30/C60=1000 samples
Comment storage
All comments including I/O comments, explanatory notes, interlinear comments
can be stored. (Backup battery is not necessary. 328 kbytes)
PLC link function
Max. 16 units, link relay: 1024 points, link register: 128 words
(Data transmission and remote programming is not possible.)
Constant scan Available
Password Available (4 digits, 8 digits)
Upload protection Available
Self-diagnosis function Such as watchdog timer, program syntax check
Program editing during RUN
High-speed
counter
Note3) Note4)
Input of main
unit
Single-phase 8 chs or 2-phase 4 chs
With single-phase 8 chs (10 kHz each),
with 2-phase 4 chs (5 kHz each)
Single-phase 8 chs (High-speed: 4 chs,
medium-speed: 4 chs), 2-phase 4 chs
(High-speed: 2 chs, medium-speed: 2
chs)
With high-speed single-phase:
1 ch (100 kHz)
2 chs (80 kHz)
3 chs (60 kHz)
4 chs (50 kHz)
With high-speed 2-phase:
1 ch (35 kHz)
2 chs (25 kHz)
With medium-speed single-phase:
4 chs (10 kHz each)
With Medium-speed 2-phase:
2 chs (5 kHz each)
Pulse I/O
cassette is
installed
C14: Single-phase 2 chs (2-phase 1 ch)
C30/C60: Single-phase 4 chs (2-phase
2 chs) when 2 cassettes are installed.
With single-phse 2 chs (80 kHz each),
2-phase 1 ch (30 kHz)
with single-phase 4 chs (50 kHz each),
2-phase 2 chs (25 kHz each)
Pulse I/O cassette cannot be installed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
To Next Page
Loading...
