– 161 –
Chapter 7 Menu Operations — Menu list
Item Description of settings
[DATE/TIME] Selects whether year/month/day and hour/minute/second are displayed simultaneously when the camera
ID is displayed.
[ON], [OFF]
f Factory setting: [OFF]
This item cannot be set when [CAMERA ID] is set to [OFF].
[ZOOM/FOCUS] Selects the unit of zoom and focus values.
[NUMBER]: Displays position values of zoom and focus from [0] to [99].
[mm/m]: Zoom is displayed in units of millimeters, and focus in units of meters.
[mm/feet]: Zoom is displayed in units of millimeters, and focus in units of feet.
[OFF]: Neither zoom nor focus is displayed.
f Factory setting: [NUMBER]
[mm/m] or [mm/feet] is displayed only when a serial lens is attached.
[SYSTEM MODE] Turns system mode display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [OFF]
[REC FORMAT] Turns recording format display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[CAMERA MODE] Turns camera mode display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[COLOR TEMP] Turns color temperature display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[CAC] Turns chromatic aberration compensation display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[GAMMA MODE] Turns gamma curve display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[DRS] Turns display of [DRS], which indicates that dynamic range stretcher function is operating, [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[FBC] Turns display of [FBC], which indicates that ash band compensation function is operating, [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[FBC WARNING DISP] Sets the warning display for ash band compensation.
[BOTH]: Displays the warning for both [FBC OFF] and [SHUTTER].
[1[FBC OFF]]: Displays the warning when ash band is detected while the ash band compensation
function is not active.
[2[SHUTTER]]: Displays the warning when the ash band compensation function and shutter display are
both set to [ON].
[OFF]: Disables the warning display.
f Factory setting: [OFF]
[SHOOTING MODE]
Turns the display of [H.SENS.] [ON]/[OFF], which indicates that the main menu → [PAINT] → [[S]
CAMERA SETTING] → [SHOOTING MODE] is set to [HIGH SENS.].
[ON], [OFF]
f Factory setting: [ON]
[FOCUS BAR] Turns the function that displays the degree of focus at bar size [ON]/[OFF].
[ON], [OFF]
f Factory setting: [OFF]
[P2CARD REMAIN] Turns display of the remaining recording capacity for the P2 card [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[REC MEDIA] Select [ON]/[OFF] of the display of selection status for recordable media (P2/microP2).
[ON], [OFF]
f Factory setting: [ON]
[BATTERY] Turns battery voltage display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[AUDIO LVL] Turns audio level meter display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[TC ON COLOR BAR] Selects whether to display time code when color bars are displayed.
[ON], [OFF]
f Factory setting: [OFF]
[TC] Selects a time code to display.
[TCG]: Displays the time code generator value during recording.
[TCR]: Displays the time code reader value during playback.
[TCG/TCR]: Displays the time code generator value during recording and the time code reader value
during playback.
[OFF]: Does not display the time code.
f Factory setting: [OFF]
To Next Page
Loading...
