– 162 –
Chapter 7 Menu Operations — Menu list
Item Description of settings
[SYSTEM INFO] Selects [ON]/[OFF] for displays of system information and warnings.
[ON], [OFF]
f Factory setting: [ON]
[COMPRESSION] Turns compression mode display [ON]/[OFF].
[ON]: When the main menu → [SYSTEM] → [SYSTEM MODE] → [COMPRESSION MODE] is set to
[DARK], [COMP] is displayed.
[OFF]: Does not display compression mode.
f Factory setting: [ON]
This item is enabled only when [LINE&FREQ] is set to [720P] and [REC FORMAT] is set to [DVCPRO HD]
from the main menu → [SYSTEM] → [SYSTEM MODE].
[SAVE LED] Sets operation of the [SAVE] lamp. (When the viewnder has the [SAVE] lamp)
[P2CARD]: Links to a warning message and ashes when recording capacity on the P2 card becomes
low.
[OFF]: The lamp is always off, and not used.
f Factory setting: [OFF]
[REC STATUS] Selects whether to display [REC] in the viewnder and the LCD monitor when the camera is recording.
[ON]: Displays [REC].
[OFF]: Does not display [REC].
f Factory setting: [OFF]
Even if this item is [OFF], if [CHAR] is selected in the main menu → [REC/PB] → [REC/PB SETUP] →
[REC TALLY], [REC] is displayed.
[PROXY DISP] Turns proxy information display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [OFF]
Error information is displayed even when the function is [OFF].
This can also be set in the main menu → [REC/PB] → [DUAL CODEC SETUP] → [PROXY DISP].
[P-REC/i-REC] Turns interval recording/pre-recording information display [ON]/[OFF].
[ON]: Displays the status of [i-REC] (interval recording) or [1-CLIP] (one-clip recording), and ashes
[P-REC] or [REC] (continued access status).
[OFF]: Does not ash [i-REC], [1-CLIP], and [P-REC]. At this time, you can check the status of [i-REC] or
[1-CLIP] on the mode check screen by pushing the <MARKER SEL>/<MODE CHECK/MENU CANCEL>
switch towards the <MCK/MCL> side.
f Factory setting: [ON]
Pre-recording mode switch information and one-clip recording start/end information are displayed
regardless of this menu setting.
[SDI REC STAT] Turns HD SDI recording control information display [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
[4G/LTE] Turns the 4G/LTE connection status display [ON]/ [OFF].
[ON], [OFF]
f Factory setting: [ON]
[REC DURING UPLOAD] Select [ON] or [OFF] of the rec during upload display status.
[ON], [OFF]
f Factory setting: [ON]
[STREAMING] Select [ON]/[OFF] indicating the distribution status of the streaming video.
[ON], [OFF]
f Factory setting: [ON]
[MODE CHECK IND]
Item Description of settings
[STATUS] Sets whether to display the status screen when the <MARKER SEL>/<MODE CHECK/MENU CANCEL>
switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
f Factory setting: [ON]
[!LED] Sets whether to display the reason that the viewnder lamp is illuminated when the <MARKER
SEL>/<MODE CHECK/MENU CANCEL> switch is pushed to the <MCK/MCL> side.
The cause for the illuminated lamp is displayed by
.
[ON], [OFF]
f Factory setting: [ON]
[FUNCTION] Sets whether to display the [FUNCTION] screen when the <MARKER SEL>/<MODE CHECK/MENU
CANCEL> switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
f Factory setting: [ON]
[AUDIO] Sets whether to display the [AUDIO] screen when the <MARKER SEL>/<MODE CHECK/MENU
CANCEL> switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
f Factory setting: [ON]
[CAC] Sets whether to display the [CAC] screen when the <MARKER SEL>/<MODE CHECK/MENU CANCEL>
switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
f Factory setting: [ON]
To Next Page
Loading...
