Panasonic AJ-PX5000G - Page 163

– 163 –
Chapter 7 Menu Operations — Menu list
Item Description of settings
[USER SW STATUS] Sets whether to display the function of each user switch or functions assigned to other switches when the
<MARKER SEL>/<MODE CHECK/MENU CANCEL> switch is pushed to the <MCK/MCL> side.
[ON], [OFF]
f Factory setting: [ON]
[P.ON IND] Sets whether to display the status screen immediately after the camera is turned on.
[ON], [OFF]
f Factory setting: [ON]
Even if [ON] is selected in this item, when [STATUS] is [OFF], the status screen is not displayed
immediately after the camera is turned on.
[!LED]
Item Description of settings
[GAIN(0dB)] Sets whether to illuminate the [!] lamp on the viewnder if the gain is other than 0 dB. (When the viewnder
has the [!] lamp)
[ON], [OFF]
f Factory setting: [ON]
[DS.GAIN] Sets whether to illuminate the [!] lamp on the viewnder when [DS.GAIN] (incremental gain) is functioning.
(When the viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [OFF]
[SHUTTER] Sets whether to illuminate the [!] lamp on the viewnder if the electronic shutter is working. (When the
viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [ON]
[WHITE PRESET] Sets whether to illuminate the [!] lamp on the viewnder if the <WHITE BAL> switch is on <PRST>. (When
the viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [OFF]
[EXTENDER] Sets whether to illuminate the [!] lamp on the viewnder if the lens extender is working. (When the
viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [ON]
[B.GAMMA] Sets whether to illuminate the [!] lamp on the viewnder if the black gamma is working. (When the
viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [OFF]
[MATRIX] Sets whether to illuminate the [!] lamp on the viewnder if the color correction table for linear matrix is
selected. (When the viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [OFF]
[COLOR CORRECTION] Sets whether to illuminate the [!] lamp on the viewnder if the 15-axis independent color correction is
selected. (When the viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [OFF]
[FILTER] Sets whether to illuminate the [!] lamp on the viewnder for any setting combination other than the
<CC FILTER> dial set to<A> (<3200 K>) and the <ND FILTER> dial set to <1> (<CLEAR>). (When the
viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [OFF]
[ATW] Sets whether to illuminate the [!] lamp on the viewnder if automatic tracking white balance is working.
(When the viewnder has the [!] lamp)
[ON], [OFF]
f Factory setting: [OFF]