Panasonic AJ-PX5000G - Page 85

– 85 –
Chapter 4 Adjustments and Settings for Recording — Viewnder status display
7 <USER> button assignment information
[UM] Indicates the <USER MAIN> button.
[U1] Indicates the <USER1> button.
[U2] Indicates the <USER2> button.
[U3] Indicates the <SHOT MARK> button.
[U4] Indicates the <TEXT MEMO> button.
[RET] Indicates the <RET> button.
[INHIBIT] Displayed when the <USER> button is not operated.
[S.GAIN **dB/OFF]
Displays the selected super gain.
[DS.GAIN **↑/OFF]
Displays the selected digital super gain.
[S.IRIS ON/OFF] Displays the super iris operation status.
[I.OVR ON/OFF] Displays the iris override operation status.
[S.BLK −**/OFF]
Displays the super black operation status. During operation, the setting value is also displayed.
[B.GAMMA ON/OFF] Displays the operation status of black gamma (black level tone compensation).
[D.ZOOM x2/x3/x4/OFF] Displays the digital zoom factor.
[ATW ON/OFF] Displays the operation status of automatic tracking white balance.
[ATW LOCK ON/OFF] Displays the lock status of automatic tracking white balance operation.
[AUD CH1/3] Displayed when the input signal to record to audio channel 1 or 3 is switched.
[AUD CH2/4] Displayed when the input signal to record to audio channel 2 or 4 is switched.
[REC SW] Displayed when the <USER> button is functioning as the <REC> switch.
[Y GET ON] Displayed when the [Y GET] function is [ON].
[RET SW] Displayed when the <USER> button is functioning as the <RET> switch.
[SLOT SEL] Displayed when the switch for switching the card to record to is set.
[PRE REC] Displayed when the pre-recording mode is switched.
[USB STORAGE/
DEVICE/OFF]
Displayed when the USB operation status is switched.
[DRS ON/OFF] Displays the operation status of the dynamic range stretcher.
[ASSIST ON/OFF] Displays the focus assist operation status.
[C.TEMP ON/OFF] Displays the status of the mode for changing the color temperature by the jog dial button.
[LCD B.L] Displayed when the brightness of the LCD monitor backlight is switched.
[SHOT MARK] Displayed when shot marks are added or deleted.
[TEXT MEMO] Displayed when a text memo is recorded.
[WFM] Displayed when the waveform monitor is switched.
[FBC ON/OFF] Displays the operation status of the ash band compensation function.
[EVF CLR] Displays the color status of the viewnder.
[REC MEDIA]
Displayed when the slot of the media used for recording is switched to [P2] (P2 memory card slots 1/2) or [mP2] (microP2
memory card slots 3/4).
[CAM RET] Displayed when the button assigned with the camera return function is pressed.
[REC CHECK] Displayed when the button assigned with the recording check function is pressed.
[REC D. UP] Displayed when enabling/disabling the rec during upload function.
[UP LIST] Displayed when the button assigned to the function to display the upload list of the rec during upload function is pressed.
[STREAMING] Displayed when starting/stopping streaming from the camera.
8 Focus bar display
Displays the high-frequency component of the video after conversion to a graph at the bottom left of the viewnder. For details, refer to “Focus assist
function” (page 94).
9 Digital zoom ratio display
Displays the digital zoom factor.
[DZx2] 2 times
[DZx3] 3 times
[DZx4] 4 times
10 Extender
[EX] Displayed when the lens extender is used.
11 Color temperature
[*.*K]
Displays the color temperature assigned to <A>, <B>, and <PRST> of the <WHITE BAL> switch. (This is sometimes a memory
value at execution of automatic white balance and sometimes a menu setting value.)
Not displayed when auto tracking white balance is performed.
12 Filter position
[1] to [4] Displays the position of the <ND FILTER> dial.
[A] to [D] Displays the position of the <CC FILTER> dial.
[−] (ashing)
The lter position is not set to the specied position.
13 <WHITE BAL> switch position