G. Camera image (click an area of the camera image to use the click to center feature (see Page 26), or
use your mouse to use the zoom feature (see Page 30) when displaying images)
H. Full-screen button (click to view the image in 4:3 full-screen mode; click to return to normal mode)
I. Status overlay (see Page 159)
J. Operation bar (see Page 24)
K. Text overlay (see Page 159)
L. Banner (see Page 159)
M. Displays [IPv4] or [IPv6] depending on the camera’s network configuration
The single camera page (H.264/MPEG-4)
H.264 or MPEG-4 images can be viewed by selecting [H.264] or [MPEG-4], respectively, under the refresh
rate selector on the single camera page.
Note
• The first time you select H.264 or MPEG-4 as the refresh rate, a license agreement is displayed. If you
agree to the terms of the license, select [I accept the License agreement], then click [OK]. You will then
be prompted to install the viewer program (ActiveX Controls).
12 Operating Instructions
1.2 Viewing Live Camera Images
To Next Page
Loading...
Need help?
General
