7.8 Built-in Alarm Settings
The camera’s built-in alarm can sound when the built-in sensor, external sensor, or motion detection is
triggered. You can set when the built-in alarm sounds, as well as the built-in alarm volume and the built-in
alarm sound type. After saving these settings, confirm the built-in alarm volume and sound type by clicking
[Sound Alarm] on the single camera page.
1. Click the [Setup] tab.
2. On the left side of the screen under [Advanced], click [Built-in Alarm].
3. Under [Trigger for Built-in Alarm], select when the built-in alarm sounds.
– [Button or sensor]: The built-in alarm sounds when [Sound Alarm] is clicked on the single camera page
and when the built-in sensor, external sensor, or motion detection is triggered.
– [Button only]: The built-in alarm sounds only when [Sound Alarm] is clicked on the single camera page.
– [Sensor only]: The built-in alarm sounds only when the built-in sensor, external sensor, or motion
detection is triggered, and the [Built-in Alarm] button is not displayed in the operation bar.
– [Off]: The built-in alarm does not sound, and the [Built-in Alarm] button is not displayed in the operation
bar.
4. Under [Built-in Alarm Volume], select the volume of the built-in alarm.
5. Under [Built-in Alarm Sound Type], select the built-in alarm sound type.
6. Click [Save].
Note
• The built-in alarm does not sound when the sound detection feature is triggered (see Page 54).
174 Operating Instructions
7.8 Built-in Alarm Settings
To Next Page
Loading...
