3.4 Enabling and Disabling Image Buffering Using
Your Mobile Phone
While accessing the camera from your mobile phone, select [Buffer/Transfer] to display the image buffer and
transfer control page on your mobile phone.
Note
• You must be logged in to the camera as an administrator to use this feature.
1. Access the camera with your mobile phone (see Page 91).
2. Select [Buffer/Transfer].
3. Select the desired trigger number to turn the trigger on or off.
4. Select [Save] to turn the selected trigger on or off.
• All images buffered in the memory are deleted when you click [Save].
5. Select [Control Page] when finished to return to the previous screen.
Operating Instructions 95
3.4 Enabling and Disabling Image Buffering Using Your Mobile Phone
To Next Page
Loading...
