7.6 Privacy Mode
Privacy mode allows you to protect your privacy by hiding the lens inside the camera, preventing camera
images from being seen. When privacy mode is activated:
– The POWER indicator turns red so that you can easily see that privacy mode is activated.
– No camera images are buffered or transferred.
– The camera image changes to a gray or black screen if privacy mode is activated while viewing camera
images.
– If privacy mode is already activated when you try to access the camera, a dialog will be displayed asking
if you want to disable privacy mode. In order to disable privacy mode, the administrator’s user name and
password must be entered.
Note
• BL-C210A/BL-C230A only: You cannot turn privacy mode on while the camera is in registration mode
(see Page 172).
Turning privacy mode on
You can turn privacy mode on by:
– Pressing the camera’s PRIVACY button (the POWER indicator will turn from green to red).
– Accessing the camera with a PC as the administrator.
1. Click the [Setup] tab.
2. On the left side of the screen under [Advanced], click [Privacy Mode].
3. Under [Privacy Mode], select [Enable].
4. Click [Save].
– Accessing the camera from a mobile phone (see Page 92) as the administrator.
Turning privacy mode off
You can turn privacy mode off by:
– Pressing the camera’s PRIVACY button (the POWER indicator will turn from red to green).
– Accessing the camera with a PC. When [Privacy Mode is enabled. Do you wish to disable?] is displayed,
click [Disable Privacy Mode] and enter the administrator user name and password if prompted.
– Accessing the camera from a mobile phone (see Page 92) as the administrator.
170 Operating Instructions
7.6 Privacy Mode
To Next Page
Loading...
