1.2.7 White Balance
While viewing camera images on the single camera page, you can use the [White Balance] selector to adjust
the camera’s image to match the environment of the camera. Change this setting to achieve the most natural
looking colors.
The following settings are available.
– [Auto]: White balance is adjusted automatically according to the image being displayed
– [Indoor]: Electric bulb (2800 K)
– [Fluorescent (White)]: White type fluorescent light (4000 K)
– [Fluorescent (Daylight)]: Daylight type fluorescent light (4800 K)
– [Outdoor]: Solar light (6000 K)
– [Hold]: Maintains the current white balance setting
Note
• “K” (Kelvin) is the unit used to measure color temperature.
• The current white balance setting is saved when you register a preset (see Page 29).
32 Operating Instructions
1.2.7 White Balance
To Next Page
Loading...
