7 Advanced Settings
7.1 Changing Image Display Settings
You can change the camera name and the way camera images are displayed each time the camera is
accessed. Use the procedure below to change the following settings:
– Camera name
– Refresh rate, image resolution, and image quality for the single camera page and for the multi camera
page
– Streaming method for the single camera page
– Default image resolution for when viewing with your mobile phone
– Overlay settings (control whether the date and time, a text message, the camera’s trigger status, and
backlight correction status are displayed)
– Default display language
– Banner settings (control whether a banner is displayed on the single camera page, and the properties of
the banner)
1. Click the [Setup] tab.
Operating Instructions 159
7.1 Changing Image Display Settings
To Next Page
Loading...
