8.4 Confirming Alarm Logs
The camera records log information each time the camera is triggered and each time the camera’s privacy
feature is turned on and off. Up to 50 events are logged, and each event includes the date, time, and type
(built-in sensor, external sensor 1, external sensor 2, motion detection, sound detection, or privacy mode on/
off).
1. Click the [Maintenance] tab.
2. On the left side of the screen under [Maintenance], click [Alarm Log].
3. Confirm the desired information.
Note
• When the camera is restarted, the alarm log content is deleted.
• You can configure the camera to send a daily log by E-mail that reports the status of triggers 1–5 (see
Page 87).
Operating Instructions 179
8.4 Confirming Alarm Logs
To Next Page
Loading...
