3.3 Viewing Alarm Logs on Your Mobile Phone
The camera records log information each time the camera is triggered and each time the camera’s privacy
feature is turned on and off. Up to 50 events are logged, and each event includes the date, time, and type
(built-in sensor, external sensor 1, external sensor 2, motion detection, sound detection, or privacy mode on/
off).
You can view the log while accessing the camera from your mobile phone.
Note
• You must be logged in to the camera as an administrator to use this feature.
1. Access the camera with your mobile phone (see Page 91).
2. Select [Alarm Log].
3. Confirm the alarm logs as necessary.
4. Select [Control Page] when finished to return to the previous screen.
A. Returns to the previous screen.
B. The number of new alarm logs is displayed.
C. The date and time of each log, and the type of each trigger is
displayed.
• The date is displayed in MM/DD format.
• The time is displayed in 24-hour format.
• [S] indicates a sensor detection.
• [So] indicates a sound detection.
• [MD] indicates a motion detection.
• [A1] indicates an external sensor 1 detection.
• [A2] indicates an external sensor 2 detection.
• [PS] indicates privacy mode starts.
• [PE] indicates privacy mode ends.
• [R] indicates [Rising: GND to Open (High).] signal type
(logical HIGH).
• [F] indicates [Falling: Open (High) to GND.] signal type
(logical LOW).
94 Operating Instructions
3.3 Viewing Alarm Logs on Your Mobile Phone
To Next Page
Loading...
