1.5 Maximum Number of Viewing Sessions in
Wireless Mode (BL-C230 Only)
When in wireless mode, because the IEEE 802.11 standard limits the bandwidth, set the maximum number of
users (including Network Camera Recorder software connections) that can view live and buffered camera
images according to the table below.
The maximum number of viewing sessions depends on:
– The [Streaming Format] setting (see 5.8 Changing Video Streaming Settings)
– The image format of the images being viewed
In a bad wireless connection, even if you set the maximum number of sessions smaller than these numbers,
the image refresh rate may decrease and images may break up or not be displayed.
When the connection method is HTTP
Streaming Format
Image Format
Max. No. of Users
*1
Pattern 1 Pattern 2 Pattern 3
H.264+MJPEG H.264 1 2 –
MJPEG 2 0 –
MPEG-4+MJPEG MPEG-4 1 2 3
MJPEG 5 3 1
When the connection method is HTTPS
Streaming Format
Image Format
Max. No. of Users
*1
Pattern 1 Pattern 2
H.264+MJPEG H.264 1 2
MJPEG 2 0
MPEG-4+MJPEG MPEG-4 1 2
MJPEG 4 3
*1
When the resolution is 640 ´ 480 and the image quality is Standard in a good wireless connection
Operating Instructions 49
1.5 Maximum Number of Viewing Sessions in Wireless Mode (BL-C230 Only)
To Next Page
Loading...
