8 Camera Administration and Maintenance
8.1 Confirming Camera Status
You can confirm various camera status information on the [Status] page such as:
– Detailed camera information, including the firmware version number and MAC address
– Detailed network information
– Dynamic DNS status
– UPnP™ status
– The status of various protocols (such as FTP, HTTP, SMTP, etc.) and whether or not there have been any
errors
The information displayed on this page can help you when the camera is not functioning as you expect it to.
Refer to this information for troubleshooting assistance.
1. Click the [Maintenance] tab.
2. On the left side of the screen under [Maintenance], click [Status].
3. Confirm the desired information.
Note
• See the Panasonic Network Camera support site (http://panasonic.net/pcc/support/netwkcam/) for
details about the information displayed on this page.
176 Operating Instructions
8.1 Confirming Camera Status
To Next Page
Loading...
