i.
If you select to enable this feature, enter the month, day, and time when Daylight Saving Time/
Summer Time begins. (The camera’s clock moves forward one hour at the set date and time.)
ii.
Enter the month, day, and time when Daylight Saving Time/Summer Time ends. (The camera’s
clock moves back one hour at the set date and time.)
4. Click [Save].
• All images buffered in the internal memory are deleted when you click [Save].
*1
[Space], ["], ['], [&], [<], and [>] cannot be entered.
Note
• The camera will not synchronize to the NTP server if there is more than an 1 hour difference between
the NTP server time and the camera’s current time. This is to protect the camera’s time setting from
fraudulent NTP server tampering, incorrect time information, etc.
• The camera’s clock becomes less accurate over time and can be affected when the camera’s
temperature changes. Using the [Automatic Time Adjustment] feature is recommended.
• Screen content varies by model number.
Operating Instructions 141
5.5 Setting the Date and Time
To Next Page
Loading...
