4. Under [User ID List], select [Guest User], then click [Modify].
5. Set the following parameters as desired.
a. Under [Access Level], select the desired setting for [Video Display Time].
– [Unlimited]: The user can view video images ([H.264], [MPEG-4], or [MJPEG]) from the camera
without restriction.
– [Not permitted]: The user can view only still images.
– [10 s]–[60 min]: The user can view video images for the selected amount of time, after which the
user can view only still images.
b. Select the desired setting for [Refresh Rate]. Still images viewed by the user will be refreshed at this
rate.
c. Select the features the user is allowed to use.
156 Operating Instructions
6.4 Guest Users
To Next Page
Loading...
