4. After the top page is displayed, click the desired tab. (Depending on how the camera has been configured,
certain tabs may not be displayed.)
XXXX
Version XXX
Running in IPv4 mode.
A B C D
K
L
M
J
G H IE F
A. To display the top page
B. To view images from this camera (see Page 10)
C. To view images from multiple cameras (see Page 45)
D. To view buffered camera images (see Page 73)
E. To configure the camera
F. To configure the camera to be accessed over the Internet (see Page 96)
G. To confirm camera status and perform camera maintenance (see Page 176)
H. To view URLs for Panasonic Network Camera support sites on the Internet (see Page 186)
I. To log in to the camera as the administrator or as a general user (see Page 158)
J. Click the desired display language
K. Displays the camera’s model number
L. Displays the camera’s firmware version number
M. Displays [IPv4] or [IPv6] depending on the camera’s network configuration
Operating Instructions 9
1.1 Accessing the Camera
To Next Page
Loading...
Need help?
General
