90
SD Memory Card Security Function
C Set the Windows log-on user name and password.
Enter the user name, then press the
Tab
key.
Enter the password, then press the
Tab
key.
Reenter the password for confirmation.
z [Do not check the user name]
When you add the check mark for [Do not check the user name], register on
the SD memory card without checking whether or not the input user name
has been set on this computer.
For example, if different user names have been set on multiple computers, as
in the case of a company, it requires a lot of work to register the user name
on each individual SD memory card for each computer.
If the check mark is on, user names for other computers can be registered on
the SD memory card
• When user names for other computers have been registered:
When restarting the computer after completing the settings, enter the
Windows user name and password to log-on to Windows without using the
SD memory card
Click [OK].
Click [Yes] on the confirmation screen
A [Private] folder will be created in the SD memory card, and a Windows log-on
user name and password will be registered.
Do not delete [Private] folder. Doing so will cancel [Use when logging on to
Windows].
z To use both when starting the computer and when logging on to Windows
Add the check mark to both [Use when starting computer] and [Use when logging
on to Windows], and input Supervisor Password, user name, and other information
according to the instructions on the screen (Î page 86)
To Next Page
Loading...
Need help?
General