Panasonic DP-3510 - Page 180

180
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Jam Error Codes (J Code) Table
Code Contents Section
J00 The Registration Sensor does not detect paper within a predetermined time after the
paper starts feeding. (Sheet Bypass)
C
J01 The 1st Paper Path Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (1st Feeder Unit)
B
J02 The 2nd Paper Path Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (2nd Feeder Unit)
B
J03 The 3rd Paper Path Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (3rd Feeder Unit)
A
J04 The 4th Paper Path Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (4th Feeder Unit)
A
J06 The LCT Paper Path Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (LCT Feeder Unit)
G
J07 The Timing Sensor does not detect paper within a predetermined time after the paper
starts feeding from 1st Feeder Unit.
B
J08 The Timing Sensor does not detect paper within a predetermined time after the Paper
Feed Roller starts rotating in the 2nd/3rd/4th Feeder Unit.
A, B
J09 The Timing Sensor does not detect paper within a predetermined time after the Paper
Feed Roller starts rotating in the LCT Unit.
B, G
J11 The 1st Paper Path Sensor does not go off within a predetermined time after the
Paper Path Sensor is activated.
B
J12 The 2nd Paper Path Sensor does not go off within a predetermined time after the
Paper Path Sensor is activated.
B
J13 The 3rd Paper Path Sensor does not go off within a predetermined time after the
Paper Path Sensor is activated.
A
J14 The 4th Paper Path Sensor does not go off within a predetermined time after the
Paper Path Sensor is activated.
A
J16 The LCT Paper Path Sensor does not go off within a predetermined time after the
Paper Path Sensor is activated.
B, G
J17 The Timing Sensor does not go off within a predetermined time after the Paper Path
Sensor is activated.
B, C
J18 The Registration Sensor does not detect within a predetermined time after the Timing
Sensor is activated.
B, C
J19 The Registration Sensor does not detect within a predetermined time after the ADU
Sensor is activated.
C, F
J21 The 1st Paper Path Sensor does not go off within a predetermined time during
initialization.
B
J22 The 2nd Paper Path Sensor does not go off within a predetermined time during
initialization.
B
J23 The 3rd Paper Path Sensor detects paper at the time during initialization. A
J24 The 4th Paper Path Sensor detects paper at the time during initialization. A
J26 The LCT Paper Path Sensor detects paper at the time during initialization. B, G
J27 The Timing Sensor detects paper at the time during initialization. B
J28 The Intermediate Roller Sensor detects paper at the time during initialization. B
J29 The 3rd/4th Paper Path Sensor detects paper at the time during initialization. A, B
J30 The Registration Sensor does not go off within a predetermined time after the Sensor
is activated. (Sheet Bypass)
C
J31 The Registration Sensor does not go off within a predetermined time after the Sensor
is activated. (Except Sheet Bypass)
C