Panasonic DP-3510

183
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
4.5.3. Mechanical Error Codes (E Code)
J78 J71 1. The ADF Registration Sensor 3 does not detect paper after the
Face Page is scanned, during 2-Sided Scanning.
2. The ADF Selection Sensor keeps detecting paper during 2-Sided
Scanning.
J
J79 J70 The ADF Registration Sensor 1 keeps detecting paper in the ADF. J
J92 J70 The paper is not detected. J
J93 J70
J71
The paper remained in the ADF. J
J94 J71 The ADF does not go off after the predetermined time. J
E1: Optical Unit Error
Code Function Check Points
E1- 01 Abnormal Platen Glass
scanning
1. Home Position Sensor connector is disconnected.
2. Home Position Sensor is defective.
3. Scanner Motor connector is disconnected.
4. Scanner Motor is defective.
5. Scanning Mechanism is defective.
6. DRV PCB connector is disconnected.
7. DRV PCB is defective.
8. SPC PCB connector is disconnected.
9. SPC PCB is defective.
10. LVPS is defective.
E1- 20 Laser Unit horizontal
synchronization 1
1. LSU connector is disconnected.
2. LSU is defective.
3. SPC PCB connector is disconnected.
4. SPC PCB is defective.
E1- 21 Laser Unit horizontal
synchronization 2
1. LSU connector is disconnected.
2. LSU is defective.
3. SPC PCB connector is disconnected.
4. SPC PCB is defective.
E1- 22 Polygon Motor synchronization 1. Polygon Motor connector is disconnected.
2. SPC PCB connector is disconnected.
3. Polygon Motor is defective.
4. LVPS is defective.
5. DRV PCB is defective.
E1- 31 Scanning Lamp
(does not turn On)
1. Scanning Lamp connector is disconnected.
2. Scanning Lamp is defective.
3. DRV PCB connector is disconnected.
4. DRV PCB is defective.
5. SC PCB is defective. (Check F4 Chip Fuse)
DP-3520/
3530/4520/
4530/6020/
6030
DP-3510/
4510/6010
Contents Section